Panasonic A6 servo drive MADLN11NE

Short Description:

Part Number MADLN11NE
Product Servo Driver
Details A6NE series
RTEX
Ultra high-speed Network type (Basic type)
without the safety function
Product name MINAS A6 Family Servo Driver
Features 50 W to 22 kW, Input power supply for Driver: Voltage DC 24 V/48 VAC 100 V/200 V/400 V, 23 bit Absolute/Incrementalbattery-less Absolute/Incremental encoder, Frequency response 3.2 kHz


We're one of the most professional FA One-stop suppliers in China.Our main products including servo motor, planetary gearbox, inverter and PLC, HMI.Brands including Panasonic, Mitsubishi, Yaskawa, Delta, TECO, Sanyo Denki ,Scheider, Siemens , Omron and etc.; Shipping time: Within 3-5 working days after getting the payment. Payment way: T/T, L/C, PayPal, West Union, Alipay, Wechat and so on

Product Detail

Product Tags

Spec Detail

Item

Specifications

Part Number MADLN11NE
Details A6NE series
RTEX
Ultra high-speed Network type (Basic type)
without the safety function
Family Name MINAS A6
Series A6NE series
Type RTEX, Ultra high-speed Network (Basic type)
Frame A-Frame
Frequency response 3.2 kHz
Control method Position control, Velocity control, and Torque control
Safety Function without
Supply voltage Single phase 100 V
I/F Classification of type RTEX
Dimensions (W) (Unit: mm) 40
Dimensions (H) (Unit: mm) 150
Dimensions (D) (Unit: mm) 130
Mass (kg) 0.8
Environment For more details, please refer to the instruction manual.

 

Basic Specifications

Item

Specifications

Input power: Main circuit Single phase 100 to 120V +10% -15% 50/60 Hz
Input power: Control circuit Single phase 100 to 120V +10% -15% 50/60 Hz
Encoder feedback 23-bit (8388608 resolution) absolute encoder, 7-wire serial
About Encoder feedback * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings).
Parallel I/O connector:
Control signal Input
Each 8 input can be assigned by the parameter.
Parallel I/O connector:
Control signal Output
Each 3 input can be assigned by the parameter.
Parallel I/O connector:
Analog signal Output
2 outputs (Analog monitor: 2 output)
Parallel I/O connector:
Pulse signal Output
Line driver output for encoder pulses (A/B phase signal).
Communication function RTEX, USB
Communication function: USB USB interface to connect to computers for parameter setting or status monitoring.
Communication function: RTEX Communication for transmission of a real-time operation command, the parameter setting, or the status monitoring.
Regeneration No built-in regenerative resistor (external resistor only)
Control mode Semi-closed control
Position control: Profile position control [PP], Cyclic position control [CP]
Velocity control: Cyclic velocity control [CV]
Torque control: Cyclic torque control [CT]

* Switch PP/CP/CV/CT mode according to the RTEX communication command.

Motors protected by a highly dust-proof, oil-tight oil seal (with protection lip) have been added to the lineup of motor products equipped with oil seals of conventional specifications. The oil seals of this type of motor are made of a material of higher heat resistance.

You can select appropriate motor type according to your application environment such as dusty, powdery or gear connection necessity.

Oil-seals (with protective lip) are not available for MSMF motors with flange size 80 mm or smaller.

MQMF and MHMF motors with flange size of 80 mm or smaller provided with oils seals (with protective lip) are not mounting-compatible with A5 Family models.

 

 


  • Previous:
  • Next: