We're one of the most professional FA One-stop suppliers in China.Our main products including servo motor, planetary gearbox, inverter and PLC, HMI.Brands including Panasonic, Mitsubishi, Yaskawa, Delta, TECO, Sanyo Denki ,Scheider, Siemens , Omron and etc.; Shipping time: Within 3-5 working days after getting the payment. Payment way: T/T, L/C, PayPal, West Union, Alipay, Wechat and so on
Item | Specifications |
---|---|
Part Number | MBDHT2510 |
Details | A5 series Speed, Position, Torque, Full-closed type with the safety function |
Family Name | MINAS A5 |
Series | A5 series |
Type | Speed, Position, Torque, Full-closed type |
Frame | B-Frame |
Frequency response | 2.3 kHz |
Control method | Position control, Velocity control, Torque control, and Full-closed control |
Safety Function | with |
Power device Max. current rating | 15A |
Current detector current rating | 10A |
Supply voltage | Single/3-phase 200 V |
I/F Classification of type | Analog/Pulse |
Dimensions (W) (Unit: mm) | 55 |
Dimensions (H) (Unit: mm) | 150 |
Dimensions (D) (Unit: mm) | 130 |
Mass (kg) | 1.0 |
Environment | For more details, please refer to the instruction manual. |
Basic Specifications
Item | Specifications |
---|---|
Input power: Main circuit | Single/3-phase 200 to 240V +10% -15% 50/60 Hz |
Input power: Control circuit | Single phase 200 to 240V +10% -15% 50/60 Hz |
Encoder feedback | 17-bit (131072 resolution) absolute encoder, 7-wire serial 20-bit (1048576 resolution) incremental encoder, 5-wire serial |
External scale feedback | A/B phase, homing signal differential input. Serial communication is also supported. |
Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
Parallel I/O connector: Analog signal Input |
3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) |
Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) |
Communication function | USB, RS232, RS485 |
Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
Communication function: RS232 | 1:1 communication |
Communication function: RS485 | 1: n communication (max 31) |
Regeneration | No built-in regenerative resistor (external resistor only) |
Control mode | Switching among the following 7 mode is enabled, (1) Position control, (2) Speed control, (3) Torque control, (4) Position/speed control, (5) Position/Torque control, (6) Speed/Torque control, (7) Full-closed control |
Easy and quick adjusting time. 5 times faster* than conventional
Greatly improved “operability”, easy-to-use software “PANATERM”.
We have upgraded setup support software PANATERM, the convenient tool for parameter setting and monitoring often required during start-up of the machine for adjustment motor and driver. Improved to more easy-understandable screen.
Equipped with “Fit Gain” function to realize speedy setup.
Newly developed feature "Fit Gain" maximizes the characteristics of A5Ⅱ series. And adaptive notch filter function can reduce the vibration that occurs when the rigidity of the device is low, you can set and adjust automatically the best variety of gain.