| ·Connector specification |
Dimensions |
| Specifications and design of the products are subject to change without notice for the product improvement. |
| Spec Detail |
|
| Item |
Specifications |
| Part Number |
MCDLN35SE |
| Details |
A6SE series |
| Position control type (Incremental system only, Pulse train only) |
| without the safety function |
|
| Family Name |
MINAS A6 |
| Series |
A6SE series |
| Type |
Position control type |
| Frame |
C-Frame |
| Frequency response |
3.2 kHz |
| Control method |
Position control |
| About control method |
A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. |
| Safety Function |
without |
| Supply voltage |
Single/3-phase 200 V |
| I/F Classification of type |
Pulse train only |
| Dimensions (W) (Unit: mm) |
65 |
| Dimensions (H) (Unit: mm) |
150 |
| Dimensions (D) (Unit: mm) |
170 |
| Mass (kg) |
1.6 |
| Environment |
For more details, please refer to the instruction manual. |
| Basic Specifications |
|
| Item |
Specifications |
| Input power: Main circuit |
Single/3-phase 200 to 240V +10% -15% 50/60 Hz |
| Input power: Control circuit |
Single phase 200 to 240V +10% -15% 50/60 Hz |
| Encoder feedback |
23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback |
* Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| Parallel I/O connector: |
|
| Control signal Input |
General purpose 10 inputs |
| The function of general-purpose input is selected by parameters. |
|
| Parallel I/O connector: |
|
| Control signal Output |
General purpose 6 output |
| The function of general-purpose output is selected by parameters. |
|
