Article number 6AV7890-0AA00-1AA0 puts a full PC behind a 12-inch IP65 touch front — one operator station that can run visualization, data logging and MES client software on a standard 24 V DC supply.
[Company Name] today introduced the Siemens SIMATIC HMI IPC677C panel PC, article number 6AV7890-0AA00-1AA0, to its automation portfolio. The unit is a built-in panel PC rather than a fixed-function HMI terminal: behind the 12-inch 800 x 600 touch display sits an Intel-based computer with its own memory, storage and operating-system layer, mounted in the same housing that bolts into a machine front panel.
AT A GLANCE
| Article number | 6AV7890-0AA00-1AA0 (SIMATIC HMI IPC677C) |
| Display | 12″ TFT touch, 800 x 600 pixels |
| Computing | Intel Celeron P4505, 1 GB DDR3 (max. 8 GB), 250 GB HDD, DVD+RW |
| Networking | 2x Gigabit Ethernet; optional PROFIBUS/MPI and up to 3 PROFINET |
| Power and protection | 24 V DC with 20 ms buffering; IP65 / NEMA 4 front, IP20 rear |
| Mechanics | Front 400 x 310.3 mm; cut-out 368 x 290 mm; depth 126 mm; approx. 13 kg |
| Approvals | CE, cULus (UL 508), RCM, KC, FCC; marine GL / ABS / BV / DNV / LRS / NK |
A gap that dedicated panels cannot close
Machine builders increasingly ask an operator station to do more than display a screen. Recipe and format management, local archiving for batch traceability, camera and code verification, performance dashboards, and a client into an MES or ERP layer all compete for the same real estate at the machine. A conventional HMI panel handles the visualization and stops there; a second box PC in the cabinet handles the rest, with its own power supply, its own enclosure and its own spare-part logistics.
The IPC677C resolves that split. One device, one cut-out, one 24 V DC feed and one spare unit in the stores cover both roles, which is why the platform remained in service on packaging, plastics, food and material-handling machines long after newer panel generations arrived.
Hardware that can carry real software
The supplied configuration pairs an Intel Celeron P4505 dual-core processor (1.86 GHz, 2 MB cache) on the Intel QM57 Express chipset with 1 GB of DDR3-1066 memory, expandable to 8 GB, and a 250 GB SATA hard disk alongside a DVD+RW drive. That is enough headroom for a WinCC runtime plus archiving, or for a third-party SCADA client running against a controller on the same network. A watchdog, temperature monitoring and fan monitoring with front status LEDs, and an onboard RAID controller for mirrored disk configurations, address the availability requirement that such combined workloads create.
Three configuration choices that matter to integrators
- · Connection to the controller. Two onboard 10/100/1000 Mbit/s Ethernet ports are standard; an isolated PROFIBUS/MPI interface (CP 5611-A2 compatible, up to 12 Mbit/s) or up to three PROFINET interfaces can be added, so an existing S7 project can be attached without rework.
- · Access at the machine. One USB 2.0 port sits on the front for project transfers and licence dongles; four more USB ports, an RS232 port for scanners, printers and weighing terminals, and a DVI-I output for a second display sit at the rear. Two free PCI slots (or one PCI plus one PCIe x16) and a CompactFlash slot remain available for fieldbus or memory expansion.
- · Installation in an existing panel. The 368 x 290 mm cut-out, 126 mm depth, ±20° permissible tilt and 24 V DC supply with 20 ms buffering allow a straight replacement in cabinets designed around this generation of panel PC, without changing the power architecture.
Where it goes to work
Typical installations are machine tools and special-purpose machinery, packaging and filling lines with frequent format changes, plastics and rubber machines with mould-data archiving, food and beverage plant where an IP65 front is washed down daily, material handling and logistics systems with scanner and printer connections, and process plant running SCADA trends and alarm management. In all of these the panel PC is also the retrofit answer: replacing an ageing unit behind an existing HMI project, rather than rebuilding the project around a new panel generation.
Availability and support
[Company Name] supplies the IPC677C as inspected stock — [new surplus / refurbished / used, specify] — with a [XX]-month warranty and [lead time] delivery from [location]. Technical support covers configuration checks before dispatch: controller connection type, HMI project version, panel cut-out and supply voltage are verified against the customer’s machine documentation, so the unit that arrives fits the machine that is waiting for it. [Add stock quantity or remove this sentence.]
Post time: Nov-19-2026