China Wholesale Teco Servo Drive Manufacturers Pricelist - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN

China Wholesale Teco Servo Drive Manufacturers Pricelist - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN Featured Image
  • China Wholesale Teco Servo Drive Manufacturers Pricelist - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN
  • China Wholesale Teco Servo Drive Manufacturers Pricelist - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN

Short Description:


We're one of the most professional FA One-stop suppliers in China.Our main products including servo motor, planetary gearbox, inverter and PLC, HMI.Brands including Panasonic, Mitsubishi, Yaskawa, Delta, TECO, Sanyo Denki ,Scheider, Siemens , Omron and etc.; Shipping time: Within 3-5 working days after getting the payment. Payment way: T/T, L/C, PayPal, West Union, Alipay, Wechat and so on

Whatsapp

Product Detail

Product Tags

Related Video

Feedback (2)

We have now a specialist, efficiency staff to provide good quality company for our consumer. We normally follow the tenet of customer-oriented, details-focused for HITECH HMI , Danfoss Inverters , Vichi Hybrid Inverter , Inspired by the rapid developing market of the fast food and beverage consumables all over the world , We are looking forward to working with partners/clients to make success together.
China Wholesale Teco Servo Drive Manufacturers Pricelist - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN Detail:

Spec Detail

Servo amplifier model MR-JE-

10A

20A

40A

70A

100A

200A

300A
Output Rated voltage

3-phase 170 V AC
Rated current[A]

1.1

1.5

2.8

5.8

6.0

11.0

11.0
Power supply input Voltage/frequency (Note 1)

3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz

3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz (Note 9)

3-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
Rated current (Note 7)[A]

0.9

1.5

2.6

3.8

5.0

10.5

14.0
Permissible voltage fluctuation

3-phase or 1-phase 170 V AC to 264 V AC

3-phase or 1-phase 170 V AC to 264 V AC (Note 9)

3-phase 170 V AC to 264 V AC
Permissible frequency fluctuation

±5% maximum
Interface power supply

24 V DC ± 10% (required current capacity: 0.3 A)
Control method

Sine-wave PWM control/current control method
Tolerable regenerative power of the built-in regenerative resistor (Note 2, 3)[W]

-

-

10

20

20

100

100
Dynamic brake

Built-in (Note 4, 8)
Communication function

USB: Connect a personal computer (MR Configurator2 compatible)
RS-422/RS-485 (Note 10): Connect a controller (1 : n communication up to 32 axes) (Note 6)
Encoder output pulse

Compatible (A/B/Z-phase pulse)
Analog monitor

2 channels
Position control mode Maximum input pulse frequency

4 Mpulses/s (when using differential receiver), 200 kpulses/s (when using open-collector)
Positioning feedback pulse

Encoder resolution: 131072 pulses/rev
Command pulse multiplying factor

Electronic gear A/B multiple, A: 1 to 16777215, B: 1 to 16777215, 1/10 < A/B < 4000
Positioning complete width setting

0 pulse to ±65535 pulses (command pulse unit)
Error excessive

±3 rotations
Torque limit

Set by parameters or external analog input (0 V DC to +10 V DC/maximum torque)
Speed control mode Speed control range

Analog speed command 1:2000, internal speed command 1:5000
Analog speed command input

0 V DC to ±10 V DC/rated speed (Speed at 10 V is changeable with [Pr. PC12].)
Speed fluctuation rate

±0.01% maximum (load fluctuation 0% to 100%), 0% (power fluctuation: ±10%)
±0.2% maximum (ambient temperature: 25℃ ± 10 ℃) only when using analog speed command
Torque limit

Set by parameters or external analog input (0 V DC to +10 V DC/maximum torque)
Torque control mode Analog torque command input

0 V DC to ±8 V DC/maximum torque (input impedance: 10 kΩ to 12 kΩ)
Speed limit

Set by parameters or external analog input (0 V DC to ± 10 V DC/rated speed)
Positioning mode

Point table method, program method
Servo function

Advanced vibration suppression control II, adaptive filter II, robust filter, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function, power monitoring function
Protective functions

Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, error excessive protection
Compliance to global standards

Refer to “Conformity with global standards and regulations” in the catalog.
Structure (IP rating)

Natural cooling, open (IP20)

Force cooling, open (IP20)
Close mounting (Note 5) 3-phase power supply input

Possible
1-phase power supply input

Possible

Not possible

-
Environment Ambient temperature

Operation: 0 ℃ to 55 ℃ (non-freezing), storage: -20 ℃ to 65 ℃ (non-freezing)
Ambient humidity

Operation/Storage: 90 %RH maximum (non-condensing)
Ambience

Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust
Altitude

1000 m or less above sea level
Vibration resistance

5.9 m/s2 at 10 Hz to 55 Hz (directions of X, Y and Z axes)
Mass[kg]

0.8

0.8

0.8

1.5

1.5

2.1

2.1

ABOUT JE DRIVER:
1. Rated output and speed of a servo motor are applicable when the servo amplifier, combined with the servo motor, is operated within the specified power supply voltage and frequency.
2. Select the most suitable regenerative option for your system with our capacity selection software.
3. Refer to “Regenerative Option” in the catalog for the tolerable regenerative power [W] when regenerative option is used.
4. When using the built-in dynamic brake, refer to “MR-JE-_A Servo Amplifier Instruction Manual” for the permissible load to motor inertia ratio.
5. When the servo amplifiers are closely mounted, keep the ambient temperature within 0 ℃ to 45 ℃, or use them with 75% or less of the effective load ratio.
6. RS-422 communication function is available with the servo amplifiers manufactured on December 2013 or later. RS-485 communication function is available with the servo amplifiers manufactured on May 2015 or later. Refer to “MR-JE-_A Servo Amplifier Instruction Manual” for how to verify the manufacturing date of the products.
7. This value is applicable when a 3-phase power supply is used.
8. The coast distance by dynamic brake of HG-KN/HG-SN servo motor series may be different from prior HF-KN/HF-SN. Contact your local sales office for more details.
9. When 1-phase 200 V AC to 240 V AC power supply is used, use them with 75% or less of the effective load ratio.
10. Compatible with Mitsubishi general-purpose AC servo protocol (RS-422/RS-485 communication) and MODBUS® RTU protocol (RS-485 communication).

SOLUTIONS OF MITSUBISHI DRIVER:

(1) Automotive/ Automotive Parts: In vehicle manufacturing plants that handle a vast number of parts and wide variety of processes, there is a need to solve various issues such as responding to mixed production of many different car models, improving production speed and quality, considering worker safety and engaging in environment-oriented initiatives.

(2) Electrical & Electronic:Electrical and electronic fields require elaborate and complex work, yet a high percentage of tasks are still performed manually. A major issue faced is how to automate the processes of part loading, surface implementation, PCB assembly, unit assembly and shipment in order to reduce human error.

 

Product detail pictures:

China Wholesale Teco Servo Drive Manufacturers Pricelist - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN detail pictures

China Wholesale Teco Servo Drive Manufacturers Pricelist - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN detail pictures

Related Product Guide:
We believe that prolonged expression partnership is really a result of top of the range, value added support, rich encounter and personal contact for China Wholesale Teco Servo Drive Manufacturers Pricelist - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN, The product will supply to all over the world, such as: London, Istanbul, Malaysia, Customer satisfaction is our first goal. Our mission is to pursue the superlative quality, making continual progress. We sincerely welcome you to make progress hand in hand with us, and construct a prosperous future together.
    • The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
    5 Stars By Raymond from Armenia - 2018.09.19 18:37
    Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
    5 Stars By Christine from British - 2018.09.29 13:24

    RELATED PRODUCTS